Category: main menu • concrete menu • Cubic feet

concrete conversion

Amount: 1 cubic foot (cu ft - ft3) of volume
Equals: 0.028 Chinese lìfāng mǐ (m3) (立方米) in volume

Converting cubic foot to Chinese lìfāng mǐ (m3) value in the concrete units scale.

TOGGLE :   from Chinese lìfāng mǐ (m3) into cubic feet in the other way around.

concrete from cubic foot to Chinese lìfāng mǐ (m3) Conversion Results:

Enter a New cubic foot Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between cubic foot (cu ft - ft3) and Chinese lìfāng mǐ (m3) (立方米) but in the other reverse direction from Chinese lìfāng mǐ (m3) into cubic feet.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 cubic foot	cu ft - ft3	= 0.028	Chinese lìfāng mǐ (m3)	立方米

Converter type: concrete measurements

This online concrete from cu ft - ft3 into 立方米 converter is a handy tool not just for certified or experienced professionals.

First unit: cubic foot (cu ft - ft3) is used for measuring volume.
Second: Chinese lìfāng mǐ (m3) (立方米) is unit of volume.

concrete per 0.028 立方米 is equivalent to 1 what?

The Chinese lìfāng mǐ (m3) amount 0.028 立方米 converts into 1 cu ft - ft3, one cubic foot. It is the EQUAL concrete volume value of 1 cubic foot but in the Chinese lìfāng mǐ (m3) volume unit alternative.

How to convert 2 cubic feet (cu ft - ft3) of concrete into Chinese lìfāng mǐ (m3) (立方米)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.028316846592 * 2 (or divide it by / 0.5)

QUESTION:
1 cu ft - ft3 of concrete = ? 立方米

ANSWER:
1 cu ft - ft3 = 0.028 立方米 of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing cubic feet and Chinese lìfāng mǐ (m3) of concrete ( cu ft - ft3 vs. 立方米 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic foot is:
cu ft - ft3
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Chinese lìfāng mǐ (m3) is:
立方米

One cubic foot of concrete converted to Chinese lìfāng mǐ (m3) equals to 0.028 立方米

How many Chinese lìfāng mǐ (m3) of concrete are in 1 cubic foot? The answer is: The change of 1 cu ft - ft3 ( cubic foot ) unit of concrete measure equals = to 0.028 立方米 ( Chinese lìfāng mǐ (m3) ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in cu ft - ft3 - cubic feet for concrete amount, the rule is that the cubic foot number gets converted into 立方米 - Chinese lìfāng mǐ (m3) or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida