﻿ Concrete 1 Chinese lìfāng mǐ (m3) volume to cubic feet converter

# concrete conversion

## Amount: 1 Chinese lìfāng mǐ (m3) (立方米) of volume Equals: 35.31 cubic feet (cu ft - ft3) in volume

Converting Chinese lìfāng mǐ (m3) to cubic feet value in the concrete units scale.

TOGGLE :   from cubic feet into Chinese lìfāng mǐ (m3) in the other way around.

## concrete from Chinese lìfāng mǐ (m3) to cubic foot Conversion Results:

### Enter a New Chinese lìfāng mǐ (m3) Amount of concrete to Convert From

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many numbers after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

## Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula uses the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate with 1 bucket of water.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between Chinese lìfāng mǐ (m3) (立方米) and cubic feet (cu ft - ft3) but in the other reverse direction from cubic feet into Chinese lìfāng mǐ (m3).

 conversion result for concrete: From Symbol Result To Symbol 1 Chinese lìfāng mǐ (m3) 立方米 = 35.31 cubic feet cu ft - ft3

# Converter type: concrete measurements

This online concrete from 立方米 into cu ft - ft3 converter is a handy tool not just for certified or experienced professionals.

First unit: Chinese lìfāng mǐ (m3) (立方米) is used for measuring volume.
Second: cubic foot (cu ft - ft3) is unit of volume.

## concrete per 35.31 cu ft - ft3 is equivalent to 1 what?

The cubic feet amount 35.31 cu ft - ft3 converts into 1 立方米, one Chinese lìfāng mǐ (m3). It is the EQUAL concrete volume value of 1 Chinese lìfāng mǐ (m3) but in the cubic feet volume unit alternative.

How to convert 2 Chinese lìfāng mǐ (m3) (立方米) of concrete into cubic feet (cu ft - ft3)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
35.314666721489 * 2 (or divide it by / 0.5)

QUESTION:
1 立方米 of concrete = ? cu ft - ft3

1 立方米 = 35.31 cu ft - ft3 of concrete

## Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Chinese lìfāng mǐ (m3) and cubic feet of concrete ( 立方米 vs. cu ft - ft3 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Chinese lìfāng mǐ (m3) is:

Abbreviation or prefix ( abbr. ) brevis - short unit symbol for cubic foot is:
cu ft - ft3

### One Chinese lìfāng mǐ (m3) of concrete converted to cubic foot equals to 35.31 cu ft - ft3

How many cubic feet of concrete are in 1 Chinese lìfāng mǐ (m3)? The answer is: The change of 1 立方米 ( Chinese lìfāng mǐ (m3) ) unit of concrete measure equals = to 35.31 cu ft - ft3 ( cubic foot ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 立方米 - Chinese lìfāng mǐ (m3) for concrete amount, the rule is that the Chinese lìfāng mǐ (m3) number gets converted into cu ft - ft3 - cubic feet or any other concrete unit absolutely exactly.

Conversion for how many cubic feet ( cu ft - ft3 ) of concrete are contained in a Chinese lìfāng mǐ (m3) ( 1 立方米 ). Or, how much in cubic feet of concrete is in 1 Chinese lìfāng mǐ (m3)? To link to this concrete Chinese lìfāng mǐ (m3) to cubic feet online converter simply cut and paste the following.
The link to this tool will appear as: concrete from Chinese lìfāng mǐ (m3) (立方米) to cubic feet (cu ft - ft3) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.