**Category**: main menu • firebrick 23% alumina menu • Cubic meters

# firebrick 23% alumina conversion

**Amount:** 1 cubic meter (m3) of volume

**Equals:** 1,196,007.77 pennyweights (dwt) in mass

Converting cubic meter to pennyweights value in the firebrick 23% alumina units scale.

TOGGLE : from pennyweights into cubic meters in the other way around.

CONVERT : between other firebrick 23% alumina measuring units - complete list.

Conversion calculator for **webmasters**.

## Standard firebrick 23% alumina content

Fire Bricks Volume vs. Weight Converter

This standard/medium duty firebrick (23% alumina Al2O3 content) volume versus weight conversion tool is based on the firebrick mass of 1.86 g/cm3 corresponding to 1,860 kg/m3 - 116.12 lbs/cu-ft

Standard type, or in other words, medium duty refractory firebrick is useful for varieties of applications. Different alumina content in firebricks (e.g. in between 38% High Duty and 17% Low Duty firebricks alumina content mark) reflects in different bulk densities plus a few other physical properties and chemical compositions - for the complete list of these, read page refractory firebricks and an article which talks also about **additional** dense mass stores more heat.

Convert firebrick 23% alumina measuring units between ** cubic meter (m3)** and

**but in the other reverse direction from pennyweights into cubic meters.**

*pennyweights (dwt)*conversion result for firebrick 23% alumina: | |||||

From | Symbol | Equals | Result | To | Symbol |

1 cubic meter | m3 | = | 1,196,007.77 | pennyweights | dwt |

# Converter type: firebrick 23% alumina measurements

This online firebrick 23% alumina from m3 into dwt converter is a handy tool not just for certified or experienced professionals.

First unit: cubic meter (m3) is used for measuring volume.

Second: pennyweight (dwt) is unit of mass.

## firebrick 23% alumina per 1,196,007.77 dwt is equivalent to 1 what?

The pennyweights amount 1,196,007.77 dwt converts into 1 m3, one cubic meter. It is the EQUAL firebrick 23% alumina volume value of 1 cubic meter but in the pennyweights mass unit alternative.

How to convert 2 cubic meters (m3) of firebrick 23% alumina into pennyweights (dwt)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:

1196007.77235 * 2 (or divide it by / 0.5)

**QUESTION**:

1 m3 of firebrick 23% alumina = ? dwt

**ANSWER**:

1 m3 = 1,196,007.77 dwt of firebrick 23% alumina

## Other applications for firebrick 23% alumina units calculator ...

With the above mentioned two-units calculating service it provides, this firebrick 23% alumina converter proved to be useful also as an online tool for:

1. practicing cubic meters and pennyweights of firebrick 23% alumina ( m3 vs. dwt ) measuring values exchange.

2. firebrick 23% alumina amounts conversion factors - between numerous unit pairs.

3. working with - how heavy is firebrick 23% alumina - values and properties.

International unit symbols for these two firebrick 23% alumina measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic meter is:

**m3**

Abbreviation or prefix ( abbr. ) brevis - short unit symbol for pennyweight is:

**dwt**

### One cubic meter of firebrick 23% alumina converted to pennyweight equals to 1,196,007.77 dwt

How many pennyweights of firebrick 23% alumina are in 1 cubic meter? The answer is: The change of 1 m3 ( cubic meter ) unit of firebrick 23% alumina measure equals = to 1,196,007.77 dwt ( pennyweight ) as the equivalent measure for the same firebrick 23% alumina type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in m3 - cubic meters for firebrick 23% alumina amount, the rule is that the cubic meter number gets converted into dwt - pennyweights or any other firebrick 23% alumina unit absolutely exactly.

#### Oven info & galleries

- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2