Amount: 1 ton (short) (sh tn) of mass
Equals: 0.067 Japanese cubic ken (間 ^3) in volume
Converting ton (short) to Japanese cubic ken value in the graphite units scale.
TOGGLE : from Japanese cubic ken into short tons in the other way around.
CONVERT : between other graphite measuring units - complete list.
Conversion calculator for webmasters.
Graphite Units Converter
The calculator reflects mass density of graphite @ 20 degree Celsius state which is 2.25g/cm3 (calculated not in cold state example 2.09 - 2.23 grams per cubic centimeter.)
Due to its physical properties it is one excellent refractory material. Graphite is lighter in weight in comparison with alumina and still it retains more heat than heavy dense firebricks do. At the same time natural graphite is well abundant on the earth hence, in year 2010, refractory businesses consumed 12,500 tonnes of it only within US.
Convert graphite measuring units between ton (short) (sh tn) and Japanese cubic ken (間 ^3) but in the other reverse direction from Japanese cubic ken into short tons.
|conversion result for graphite:|
|1 ton (short)||sh tn||=||0.067||Japanese cubic ken||間 ^3|
Converter type: graphite measurements
This online graphite from sh tn into 間 ^3 converter is a handy tool not just for certified or experienced professionals.
First unit: ton (short) (sh tn) is used for measuring mass.
Second: Japanese cubic ken (間 ^3) is unit of volume.
graphite per 0.067 間 ^3 is equivalent to 1 what?
The Japanese cubic ken amount 0.067 間 ^3 converts into 1 sh tn, one ton (short). It is the EQUAL graphite mass value of 1 ton (short) but in the Japanese cubic ken volume unit alternative.
How to convert 2 short tons (sh tn) of graphite into Japanese cubic ken (間 ^3)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.067081271607777 * 2 (or divide it by / 0.5)
1 sh tn of graphite = ? 間 ^3
1 sh tn = 0.067 間 ^3 of graphite
Other applications for graphite units calculator ...
With the above mentioned two-units calculating service it provides, this graphite converter proved to be useful also as an online tool for:
1. practicing short tons and Japanese cubic ken of graphite ( sh tn vs. 間 ^3 ) measuring values exchange.
2. graphite amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is graphite - values and properties.
International unit symbols for these two graphite measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for ton (short) is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese cubic ken is:
One ton (short) of graphite converted to Japanese cubic ken equals to 0.067 間 ^3
How many Japanese cubic ken of graphite are in 1 ton (short)? The answer is: The change of 1 sh tn ( ton (short) ) unit of graphite measure equals = to 0.067 間 ^3 ( Japanese cubic ken ) as the equivalent measure for the same graphite type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in sh tn - short tons for graphite amount, the rule is that the ton (short) number gets converted into 間 ^3 - Japanese cubic ken or any other graphite unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2