﻿ Graphite 1 cubic millimeter volume to Japanese kanme converter

# graphite conversion

## Amount: 1 cubic millimeter (mm3) of volume Equals: 0.00000060 Japanese kanme (貫目) in mass

Converting cubic millimeter to Japanese kanme value in the graphite units scale.

TOGGLE :   from Japanese kanme into cubic millimeters in the other way around.

## graphite from cubic millimeter to Japanese kanme Conversion Results:

### Enter a New cubic millimeter Amount of graphite to Convert From

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many numbers after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other graphite measuring units - complete list.

Conversion calculator for webmasters.

## Graphite Units Converter

The calculator reflects mass density of graphite @ 20 degree Celsius state which is 2.25g/cm3 (calculated not in cold state example 2.09 - 2.23 grams per cubic centimeter.)

Due to its physical properties it is one excellent refractory material. Graphite is lighter in weight in comparison with alumina and still it retains more heat than heavy dense firebricks do. At the same time natural graphite is well abundant on the earth hence, in year 2010, refractory businesses consumed 12,500 tonnes of it only within US.

Convert graphite measuring units between cubic millimeter (mm3) and Japanese kanme (貫目) but in the other reverse direction from Japanese kanme into cubic millimeters.

 conversion result for graphite: From Symbol Equals Result To Symbol 1 cubic millimeter mm3 = 0.00000060 Japanese kanme 貫目

# Converter type: graphite measurements

This online graphite from mm3 into 貫目 converter is a handy tool not just for certified or experienced professionals.

First unit: cubic millimeter (mm3) is used for measuring volume.
Second: Japanese kanme (貫目) is unit of mass.

## graphite per 0.00000060 貫目 is equivalent to 1 what?

The Japanese kanme amount 0.00000060 貫目 converts into 1 mm3, one cubic millimeter. It is the EQUAL graphite volume value of 1 cubic millimeter but in the Japanese kanme mass unit alternative.

How to convert 2 cubic millimeters (mm3) of graphite into Japanese kanme (貫目)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
6.0E-7 * 2 (or divide it by / 0.5)

QUESTION:
1 mm3 of graphite = ? 貫目

1 mm3 = 0.00000060 貫目 of graphite

## Other applications for graphite units calculator ...

With the above mentioned two-units calculating service it provides, this graphite converter proved to be useful also as an online tool for:
1. practicing cubic millimeters and Japanese kanme of graphite ( mm3 vs. 貫目 ) measuring values exchange.
2. graphite amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is graphite - values and properties.

International unit symbols for these two graphite measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic millimeter is:
mm3
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese kanme is:

### One cubic millimeter of graphite converted to Japanese kanme equals to 0.00000060 貫目

How many Japanese kanme of graphite are in 1 cubic millimeter? The answer is: The change of 1 mm3 ( cubic millimeter ) unit of graphite measure equals = to 0.00000060 貫目 ( Japanese kanme ) as the equivalent measure for the same graphite type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in mm3 - cubic millimeters for graphite amount, the rule is that the cubic millimeter number gets converted into 貫目 - Japanese kanme or any other graphite unit absolutely exactly.

Conversion for how many Japanese kanme ( 貫目 ) of graphite are contained in a cubic millimeter ( 1 mm3 ). Or, how much in Japanese kanme of graphite is in 1 cubic millimeter? To link to this graphite cubic millimeter to Japanese kanme online converter simply cut and paste the following.
The link to this tool will appear as: graphite from cubic millimeter (mm3) to Japanese kanme (貫目) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.