Amount: 1 cubic millimeter (mm3) of volume
Equals: 0.000000036 Japanese cubic shaku (尺 ^3) in volume
Converting cubic millimeter to Japanese cubic shaku value in the graphite units scale.
TOGGLE : from Japanese cubic shaku into cubic millimeters in the other way around.
CONVERT : between other graphite measuring units - complete list.
Conversion calculator for webmasters.
Graphite Units Converter
The calculator reflects mass density of graphite @ 20 degree Celsius state which is 2.25g/cm3 (calculated not in cold state example 2.09 - 2.23 grams per cubic centimeter.)
Due to its physical properties it is one excellent refractory material. Graphite is lighter in weight in comparison with alumina and still it retains more heat than heavy dense firebricks do. At the same time natural graphite is well abundant on the earth hence, in year 2010, refractory businesses consumed 12,500 tonnes of it only within US.
Convert graphite measuring units between cubic millimeter (mm3) and Japanese cubic shaku (尺 ^3) but in the other reverse direction from Japanese cubic shaku into cubic millimeters.
|conversion result for graphite:|
|1 cubic millimeter||mm3||=||0.000000036||Japanese cubic shaku||尺 ^3|
Converter type: graphite measurements
This online graphite from mm3 into 尺 ^3 converter is a handy tool not just for certified or experienced professionals.
First unit: cubic millimeter (mm3) is used for measuring volume.
Second: Japanese cubic shaku (尺 ^3) is unit of volume.
graphite per 0.000000036 尺 ^3 is equivalent to 1 what?
The Japanese cubic shaku amount 0.000000036 尺 ^3 converts into 1 mm3, one cubic millimeter. It is the EQUAL graphite volume value of 1 cubic millimeter but in the Japanese cubic shaku volume unit alternative.
How to convert 2 cubic millimeters (mm3) of graphite into Japanese cubic shaku (尺 ^3)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
3.5937E-8 * 2 (or divide it by / 0.5)
1 mm3 of graphite = ? 尺 ^3
1 mm3 = 0.000000036 尺 ^3 of graphite
Other applications for graphite units calculator ...
With the above mentioned two-units calculating service it provides, this graphite converter proved to be useful also as an online tool for:
1. practicing cubic millimeters and Japanese cubic shaku of graphite ( mm3 vs. 尺 ^3 ) measuring values exchange.
2. graphite amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is graphite - values and properties.
International unit symbols for these two graphite measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic millimeter is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese cubic shaku is:
One cubic millimeter of graphite converted to Japanese cubic shaku equals to 0.000000036 尺 ^3
How many Japanese cubic shaku of graphite are in 1 cubic millimeter? The answer is: The change of 1 mm3 ( cubic millimeter ) unit of graphite measure equals = to 0.000000036 尺 ^3 ( Japanese cubic shaku ) as the equivalent measure for the same graphite type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in mm3 - cubic millimeters for graphite amount, the rule is that the cubic millimeter number gets converted into 尺 ^3 - Japanese cubic shaku or any other graphite unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2