firebrick 23% alumina conversion
Amount: 1 pennyweight (dwt) of mass
Equals: 0.88 drams (dr) in mass
Converting pennyweight to drams value in the firebrick 23% alumina units scale.
TOGGLE : from drams into pennyweights in the other way around.
CONVERT : between other firebrick 23% alumina measuring units - complete list.
Conversion calculator for webmasters.
Standard firebrick 23% alumina content
Fire Bricks Volume vs. Weight Converter
This standard/medium duty firebrick (23% alumina Al2O3 content) volume versus weight conversion tool is based on the firebrick mass of 1.86 g/cm3 corresponding to 1,860 kg/m3 - 116.12 lbs/cu-ft
Standard type, or in other words, medium duty refractory firebrick is useful for varieties of applications. Different alumina content in firebricks (e.g. in between 38% High Duty and 17% Low Duty firebricks alumina content mark) reflects in different bulk densities plus a few other physical properties and chemical compositions - for the complete list of these, read page refractory firebricks and an article which talks also about additional dense mass stores more heat.
Convert firebrick 23% alumina measuring units between pennyweight (dwt) and drams (dr) but in the other reverse direction from drams into pennyweights.
|conversion result for firebrick 23% alumina:|
Converter type: firebrick 23% alumina measurements
This online firebrick 23% alumina from dwt into dr converter is a handy tool not just for certified or experienced professionals.
First unit: pennyweight (dwt) is used for measuring mass.
Second: dram (dr) is unit of mass.
firebrick 23% alumina per 0.88 dr is equivalent to 1 what?
The drams amount 0.88 dr converts into 1 dwt, one pennyweight. It is the EQUAL firebrick 23% alumina mass value of 1 pennyweight but in the drams mass unit alternative.
How to convert 2 pennyweights (dwt) of firebrick 23% alumina into drams (dr)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.87771428571429 * 2 (or divide it by / 0.5)
1 dwt of firebrick 23% alumina = ? dr
1 dwt = 0.88 dr of firebrick 23% alumina
Other applications for firebrick 23% alumina units calculator ...
With the above mentioned two-units calculating service it provides, this firebrick 23% alumina converter proved to be useful also as an online tool for:
1. practicing pennyweights and drams of firebrick 23% alumina ( dwt vs. dr ) measuring values exchange.
2. firebrick 23% alumina amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is firebrick 23% alumina - values and properties.
International unit symbols for these two firebrick 23% alumina measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for pennyweight is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for dram is:
One pennyweight of firebrick 23% alumina converted to dram equals to 0.88 dr
How many drams of firebrick 23% alumina are in 1 pennyweight? The answer is: The change of 1 dwt ( pennyweight ) unit of firebrick 23% alumina measure equals = to 0.88 dr ( dram ) as the equivalent measure for the same firebrick 23% alumina type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in dwt - pennyweights for firebrick 23% alumina amount, the rule is that the pennyweight number gets converted into dr - drams or any other firebrick 23% alumina unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2