**Category**: main menu • firebrick 33% alumina menu • Short tons

# firebrick 33% alumina conversion

**Amount:** 1 ton (short) (sh tn) of mass

**Equals:** 453.59 cubic decimeters (dm3) in volume

Converting ton (short) to cubic decimeters value in the firebrick 33% alumina units scale.

TOGGLE : from cubic decimeters into short tons in the other way around.

CONVERT : between other firebrick 33% alumina measuring units - complete list.

Conversion calculator for **webmasters**.

## High Duty Firebrick 33% Alumina Content

Fire Bricks Volume vs. Weight Converter

A high duty firebrick (33% alumina Al2O3 content) weight vs. volume calculator is based on its mass density of 2.00 g/cm3 which converts to 12.5 lbs/cu-ft or Metric 2,000 kg/m3 this firebrick has. A visible difference in mass if compared with the standard 23% alumina firebrick product. It is a high duty refractory product made from fire clay.

High duty type refractory firebrick is useful in various high heat resistant applications. Different contents of alumina in firebricks for instance (e.g. ranges between 17% or lesser and 38% or heavier alumina content levels) equals in different bulk-densities and a few other physical properties and chemical compositions specific firebricks carry. See their complete list on page refractory firebricks plus an article related not just to better heat retention & absorption within an additional dense mass layer application.

Convert firebrick 33% alumina measuring units between ** ton (short) (sh tn)** and

**but in the other reverse direction from cubic decimeters into short tons.**

*cubic decimeters (dm3)*conversion result for firebrick 33% alumina: | |||||

From | Symbol | Equals | Result | To | Symbol |

1 ton (short) | sh tn | = | 453.59 | cubic decimeters | dm3 |

# Converter type: firebrick 33% alumina measurements

This online firebrick 33% alumina from sh tn into dm3 converter is a handy tool not just for certified or experienced professionals.

First unit: ton (short) (sh tn) is used for measuring mass.

Second: cubic decimeter (dm3) is unit of volume.

## firebrick 33% alumina per 453.59 dm3 is equivalent to 1 what?

The cubic decimeters amount 453.59 dm3 converts into 1 sh tn, one ton (short). It is the EQUAL firebrick 33% alumina mass value of 1 ton (short) but in the cubic decimeters volume unit alternative.

How to convert 2 short tons (sh tn) of firebrick 33% alumina into cubic decimeters (dm3)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:

453.59237 * 2 (or divide it by / 0.5)

**QUESTION**:

1 sh tn of firebrick 33% alumina = ? dm3

**ANSWER**:

1 sh tn = 453.59 dm3 of firebrick 33% alumina

## Other applications for firebrick 33% alumina units calculator ...

With the above mentioned two-units calculating service it provides, this firebrick 33% alumina converter proved to be useful also as an online tool for:

1. practicing short tons and cubic decimeters of firebrick 33% alumina ( sh tn vs. dm3 ) measuring values exchange.

2. firebrick 33% alumina amounts conversion factors - between numerous unit pairs.

3. working with - how heavy is firebrick 33% alumina - values and properties.

International unit symbols for these two firebrick 33% alumina measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for ton (short) is:

**sh tn**

Abbreviation or prefix ( abbr. ) brevis - short unit symbol for cubic decimeter is:

**dm3**

### One ton (short) of firebrick 33% alumina converted to cubic decimeter equals to 453.59 dm3

How many cubic decimeters of firebrick 33% alumina are in 1 ton (short)? The answer is: The change of 1 sh tn ( ton (short) ) unit of firebrick 33% alumina measure equals = to 453.59 dm3 ( cubic decimeter ) as the equivalent measure for the same firebrick 33% alumina type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in sh tn - short tons for firebrick 33% alumina amount, the rule is that the ton (short) number gets converted into dm3 - cubic decimeters or any other firebrick 33% alumina unit absolutely exactly.

#### Oven info & galleries

- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Fire-bricks
- Fire-clay
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2