Amount: 1 ton US (short) (sh tn) of mass
Equals: 3,401,942.77 Japanese momme (匁) in mass
Converting ton US (short) to Japanese momme value in the concrete units scale.
TOGGLE : from Japanese momme into short tons US in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula uses the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate with 1 bucket of water.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between ton US (short) (sh tn) and Japanese momme (匁) but in the other reverse direction from Japanese momme into short tons US.
|conversion result for concrete:|
|1 ton US (short)||sh tn||= 3,401,942.77||Japanese momme||匁|
Converter type: concrete measurements
This online concrete from sh tn into 匁 converter is a handy tool not just for certified or experienced professionals.
First unit: ton US (short) (sh tn) is used for measuring mass.
Second: Japanese momme (匁) is unit of mass.
concrete per 3,401,942.77 匁 is equivalent to 1 what?
The Japanese momme amount 3,401,942.77 匁 converts into 1 sh tn, one ton US (short). It is the EQUAL concrete mass value of 1 ton US (short) but in the Japanese momme mass unit alternative.
How to convert 2 short tons US (sh tn) of concrete into Japanese momme (匁)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
3401942.775 * 2 (or divide it by / 0.5)
1 sh tn of concrete = ? 匁
1 sh tn = 3,401,942.77 匁 of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing short tons US and Japanese momme of concrete ( sh tn vs. 匁 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for ton US (short) is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese momme is:
One ton US (short) of concrete converted to Japanese momme equals to 3,401,942.77 匁
How many Japanese momme of concrete are in 1 ton US (short)? The answer is: The change of 1 sh tn ( ton US (short) ) unit of concrete measure equals = to 3,401,942.77 匁 ( Japanese momme ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in sh tn - short tons US for concrete amount, the rule is that the ton US (short) number gets converted into 匁 - Japanese momme or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2