﻿ Concrete 1 stone mass to solid ∅ 1 foot spheres converter

# concrete conversion

## Amount: 1 stone (st) of mass Equals: 0.18 solid ∅ 1 foot spheres (d, ∅ 1 ft) in volume

Converting stone to solid ∅ 1 foot spheres value in the concrete units scale.

TOGGLE :   from solid ∅ 1 foot spheres into stones in the other way around.

## concrete from stone to sphere 1 foot in diameter Conversion Results:

### Enter a New stone Amount of concrete to Convert From

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many numbers after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

## Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between stone (st) and solid ∅ 1 foot spheres (d, ∅ 1 ft) but in the other reverse direction from solid ∅ 1 foot spheres into stones.

 conversion result for concrete: From Symbol Result To Symbol 1 stone st = 0.18 solid ∅ 1 foot spheres d, ∅ 1 ft

# Converter type: concrete measurements

This online concrete from st into d, ∅ 1 ft converter is a handy tool not just for certified or experienced professionals.

First unit: stone (st) is used for measuring mass.
Second: sphere 1 foot in diameter (d, ∅ 1 ft) is unit of volume.

## concrete per 0.18 d, ∅ 1 ft is equivalent to 1 what?

The solid ∅ 1 foot spheres amount 0.18 d, ∅ 1 ft converts into 1 st, one stone. It is the EQUAL concrete mass value of 1 stone but in the solid ∅ 1 foot spheres volume unit alternative.

How to convert 2 stones (st) of concrete into solid ∅ 1 foot spheres (d, ∅ 1 ft)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.17797497415149 * 2 (or divide it by / 0.5)

QUESTION:
1 st of concrete = ? d, ∅ 1 ft

1 st = 0.18 d, ∅ 1 ft of concrete

## Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing stones and solid ∅ 1 foot spheres of concrete ( st vs. d, ∅ 1 ft ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for stone is:
st
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for sphere 1 foot in diameter is:
d, ∅ 1 ft

### One stone of concrete converted to sphere 1 foot in diameter equals to 0.18 d, ∅ 1 ft

How many solid ∅ 1 foot spheres of concrete are in 1 stone? The answer is: The change of 1 st ( stone ) unit of concrete measure equals = to 0.18 d, ∅ 1 ft ( sphere 1 foot in diameter ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in st - stones for concrete amount, the rule is that the stone number gets converted into d, ∅ 1 ft - solid ∅ 1 foot spheres or any other concrete unit absolutely exactly.

Conversion for how many solid ∅ 1 foot spheres ( d, ∅ 1 ft ) of concrete are contained in a stone ( 1 st ). Or, how much in solid ∅ 1 foot spheres of concrete is in 1 stone? To link to this concrete stone to solid ∅ 1 foot spheres online converter simply cut and paste the following.
The link to this tool will appear as: concrete from stone (st) to solid ∅ 1 foot spheres (d, ∅ 1 ft) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.