Amount: 1 liter (L) of volume
Equals: 0.055 Japanese to (斗) in volume
Converting liter to Japanese to value in the concrete units scale.
TOGGLE : from Japanese to into liters in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between liter (L) and Japanese to (斗) but in the other reverse direction from Japanese to into liters.
|conversion result for concrete:|
|1 liter||L||= 0.055||Japanese to||斗|
Converter type: concrete measurements
This online concrete from L into 斗 converter is a handy tool not just for certified or experienced professionals.
First unit: liter (L) is used for measuring volume.
Second: Japanese to (斗) is unit of volume.
concrete per 0.055 斗 is equivalent to 1 what?
The Japanese to amount 0.055 斗 converts into 1 L, one liter. It is the EQUAL concrete volume value of 1 liter but in the Japanese to volume unit alternative.
How to convert 2 liters (L) of concrete into Japanese to (斗)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.055435235318617 * 2 (or divide it by / 0.5)
1 L of concrete = ? 斗
1 L = 0.055 斗 of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing liters and Japanese to of concrete ( L vs. 斗 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for liter is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese to is:
One liter of concrete converted to Japanese to equals to 0.055 斗
How many Japanese to of concrete are in 1 liter? The answer is: The change of 1 L ( liter ) unit of concrete measure equals = to 0.055 斗 ( Japanese to ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in L - liters for concrete amount, the rule is that the liter number gets converted into 斗 - Japanese to or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2