﻿ Concrete 1 kilonewton gravity force to stones converter

# concrete conversion

## Amount: 1 kilonewton (kN) of gravity force Equals: 16.06 stones (st) in mass

Converting kilonewton to stones value in the concrete units scale.

TOGGLE :   from stones into kilonewtons in the other way around.

## concrete from kilonewton to stone Conversion Results:

### Enter a New kilonewton Amount of concrete to Convert From

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many numbers after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

## Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula uses the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate with 1 bucket of water.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between kilonewton (kN) and stones (st) but in the other reverse direction from stones into kilonewtons.

 conversion result for concrete: From Symbol Result To Symbol 1 kilonewton kN = 16.06 stones st

# Converter type: concrete measurements

This online concrete from kN into st converter is a handy tool not just for certified or experienced professionals.

First unit: kilonewton (kN) is used for measuring gravity force.
Second: stone (st) is unit of mass.

## concrete per 16.06 st is equivalent to 1 what?

The stones amount 16.06 st converts into 1 kN, one kilonewton. It is the EQUAL concrete gravity force value of 1 kilonewton but in the stones mass unit alternative.

How to convert 2 kilonewtons (kN) of concrete into stones (st)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
16.057781649979 * 2 (or divide it by / 0.5)

QUESTION:
1 kN of concrete = ? st

1 kN = 16.06 st of concrete

## Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing kilonewtons and stones of concrete ( kN vs. st ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for kilonewton is:
kN
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for stone is:
st

### One kilonewton of concrete converted to stone equals to 16.06 st

How many stones of concrete are in 1 kilonewton? The answer is: The change of 1 kN ( kilonewton ) unit of concrete measure equals = to 16.06 st ( stone ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in kN - kilonewtons for concrete amount, the rule is that the kilonewton number gets converted into st - stones or any other concrete unit absolutely exactly.

Conversion for how many stones ( st ) of concrete are contained in a kilonewton ( 1 kN ). Or, how much in stones of concrete is in 1 kilonewton? To link to this concrete kilonewton to stones online converter simply cut and paste the following.
The link to this tool will appear as: concrete from kilonewton (kN) to stones (st) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.