Amount: 1 Japanese shō (升) of volume
Equals: 0.072 Taiwanese piculs (擔 dàn) in mass
Converting Japanese shō to Taiwanese piculs value in the concrete units scale.
TOGGLE : from Taiwanese piculs into Japanese shō in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula uses the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate with 1 bucket of water.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between Japanese shō (升) and Taiwanese piculs (擔 dàn) but in the other reverse direction from Taiwanese piculs into Japanese shō.
|conversion result for concrete:|
|1 Japanese shō||升||= 0.072||Taiwanese piculs||擔 dàn|
Converter type: concrete measurements
This online concrete from 升 into 擔 dàn converter is a handy tool not just for certified or experienced professionals.
First unit: Japanese shō (升) is used for measuring volume.
Second: Taiwanese picul (擔 dàn) is unit of mass.
concrete per 0.072 擔 dàn is equivalent to 1 what?
The Taiwanese piculs amount 0.072 擔 dàn converts into 1 升, one Japanese shō. It is the EQUAL concrete volume value of 1 Japanese shō but in the Taiwanese piculs mass unit alternative.
How to convert 2 Japanese shō (升) of concrete into Taiwanese piculs (擔 dàn)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.072352606568615 * 2 (or divide it by / 0.5)
1 升 of concrete = ? 擔 dàn
1 升 = 0.072 擔 dàn of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Japanese shō and Taiwanese piculs of concrete ( 升 vs. 擔 dàn ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Japanese shō is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Taiwanese picul is:
One Japanese shō of concrete converted to Taiwanese picul equals to 0.072 擔 dàn
How many Taiwanese piculs of concrete are in 1 Japanese shō? The answer is: The change of 1 升 ( Japanese shō ) unit of concrete measure equals = to 0.072 擔 dàn ( Taiwanese picul ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 升 - Japanese shō for concrete amount, the rule is that the Japanese shō number gets converted into 擔 dàn - Taiwanese piculs or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2