All content site-map & Search> Building plans> Building details> Cooking> Firing ovens> Food nutrients> Flour measures> Oven photos>

Category: main menuconcrete menuJapanese kanme

concrete conversion

Amount: 1 Japanese kanme (貫, 貫目) of mass
Equals: 0.00011 cubic meters (m3) in volume

Converting Japanese kanme to cubic meters value in the concrete units scale.

TOGGLE :   from cubic meters into Japanese kanme in the other way around.

concrete from Japanese kanme to cubic meter Conversion Results:

Enter a New Japanese kanme Amount of concrete to Convert From

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many numbers after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between Japanese kanme (貫, 貫目) and cubic meters (m3) but in the other reverse direction from cubic meters into Japanese kanme.

conversion result for concrete:
FromSymbolResultToSymbol
1 Japanese kanme 貫, 貫目 = 0.00011 cubic meters m3

Converter type: concrete measurements

This online concrete from 貫, 貫目 into m3 converter is a handy tool not just for certified or experienced professionals.

First unit: Japanese kanme (貫, 貫目) is used for measuring mass.
Second: cubic meter (m3) is unit of volume.

concrete per 0.00011 m3 is equivalent to 1 what?

The cubic meters amount 0.00011 m3 converts into 1 貫, 貫目, one Japanese kanme. It is the EQUAL concrete mass value of 1 Japanese kanme but in the cubic meters volume unit alternative.

How to convert 2 Japanese kanme (貫, 貫目) of concrete into cubic meters (m3)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.00011080960451977 * 2 (or divide it by / 0.5)

QUESTION:
1 貫, 貫目 of concrete = ? m3

ANSWER:
1 貫, 貫目 = 0.00011 m3 of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Japanese kanme and cubic meters of concrete ( 貫, 貫目 vs. m3 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Japanese kanme is:
貫, 貫目
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for cubic meter is:
m3

One Japanese kanme of concrete converted to cubic meter equals to 0.00011 m3

How many cubic meters of concrete are in 1 Japanese kanme? The answer is: The change of 1 貫, 貫目 ( Japanese kanme ) unit of concrete measure equals = to 0.00011 m3 ( cubic meter ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 貫, 貫目 - Japanese kanme for concrete amount, the rule is that the Japanese kanme number gets converted into m3 - cubic meters or any other concrete unit absolutely exactly.

Conversion for how many cubic meters ( m3 ) of concrete are contained in a Japanese kanme ( 1 貫, 貫目 ). Or, how much in cubic meters of concrete is in 1 Japanese kanme? To link to this concrete Japanese kanme to cubic meters online converter simply cut and paste the following.
The link to this tool will appear as: concrete from Japanese kanme (貫, 貫目) to cubic meters (m3) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.