Amount: 1 cubic meter (m3) of volume
Equals: 64,174.14 Taiwanese taels (兩 liǎng) in mass
Converting cubic meter to Taiwanese taels value in the concrete units scale.
TOGGLE : from Taiwanese taels into cubic meters in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula uses the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate with 1 bucket of water.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between cubic meter (m3) and Taiwanese taels (兩 liǎng) but in the other reverse direction from Taiwanese taels into cubic meters.
|conversion result for concrete:|
|1 cubic meter||m3||= 64,174.14||Taiwanese taels||兩 liǎng|
Converter type: concrete measurements
This online concrete from m3 into 兩 liǎng converter is a handy tool not just for certified or experienced professionals.
First unit: cubic meter (m3) is used for measuring volume.
Second: Taiwanese tael (兩 liǎng) is unit of mass.
concrete per 64,174.14 兩 liǎng is equivalent to 1 what?
The Taiwanese taels amount 64,174.14 兩 liǎng converts into 1 m3, one cubic meter. It is the EQUAL concrete volume value of 1 cubic meter but in the Taiwanese taels mass unit alternative.
How to convert 2 cubic meters (m3) of concrete into Taiwanese taels (兩 liǎng)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
64174.140336744 * 2 (or divide it by / 0.5)
1 m3 of concrete = ? 兩 liǎng
1 m3 = 64,174.14 兩 liǎng of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing cubic meters and Taiwanese taels of concrete ( m3 vs. 兩 liǎng ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic meter is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Taiwanese tael is:
One cubic meter of concrete converted to Taiwanese tael equals to 64,174.14 兩 liǎng
How many Taiwanese taels of concrete are in 1 cubic meter? The answer is: The change of 1 m3 ( cubic meter ) unit of concrete measure equals = to 64,174.14 兩 liǎng ( Taiwanese tael ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in m3 - cubic meters for concrete amount, the rule is that the cubic meter number gets converted into 兩 liǎng - Taiwanese taels or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2