Category: main menu • concrete menu • Chinese sháo
Amount: 1 Chinese sháo (勺) of volume
Equals: 0.90 Japanese hyakume (hyakume) in 百目
Converting Chinese sháo to Japanese hyakume value in the concrete units scale.
TOGGLE : from Japanese hyakume into Chinese sháo in the other way around.
CONVERT : between other concrete measuring units - complete list.
Conversion calculator for webmasters.
This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.
The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.
Convert concrete measuring units between Chinese sháo (勺) and Japanese hyakume (hyakume) but in the other reverse direction from Japanese hyakume into Chinese sháo.
|conversion result for concrete:|
|1 Chinese sháo||勺||= 0.90||Japanese hyakume||hyakume|
Converter type: concrete measurements
This online concrete from 勺 into hyakume converter is a handy tool not just for certified or experienced professionals.
First unit: Chinese sháo (勺) is used for measuring volume.
Second: Japanese hyakume (hyakume) is unit of 百目.
concrete per 0.90 hyakume is equivalent to 1 what?
The Japanese hyakume amount 0.90 hyakume converts into 1 勺, one Chinese sháo. It is the EQUAL concrete volume value of 1 Chinese sháo but in the Japanese hyakume 百目 unit alternative.
How to convert 2 Chinese sháo (勺) of concrete into Japanese hyakume (hyakume)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.90244884848547 * 2 (or divide it by / 0.5)
1 勺 of concrete = ? hyakume
1 勺 = 0.90 hyakume of concrete
Other applications for concrete units calculator ...
With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing Chinese sháo and Japanese hyakume of concrete ( 勺 vs. hyakume ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.
International unit symbols for these two concrete measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for Chinese sháo is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese hyakume is:
One Chinese sháo of concrete converted to Japanese hyakume equals to 0.90 hyakume
How many Japanese hyakume of concrete are in 1 Chinese sháo? The answer is: The change of 1 勺 ( Chinese sháo ) unit of concrete measure equals = to 0.90 hyakume ( Japanese hyakume ) as the equivalent measure for the same concrete type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 勺 - Chinese sháo for concrete amount, the rule is that the Chinese sháo number gets converted into hyakume - Japanese hyakume or any other concrete unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2