Portland cement conversion
Amount: 1 stone (st) of mass
Equals: 0.11 Taiwanese piculs (dàn) in mass
Converting stone to Taiwanese piculs value in the Portland cement units scale.
TOGGLE : from Taiwanese piculs into stones in the other way around.
CONVERT : between other Portland cement measuring units - complete list.
Conversion calculator for webmasters.
General Portland cement
General or common purpose Portland cement type (not any other weaker/cheaper cement replacement-version). It's the primary masonry binder hence bonding agent for mortars and concretes consisting of building sand, stones or other gravel aggregate, mixed with water.
By standard practice, when freshly poured, Portland cement has unit volume mass of 94 lbs/cu-ft - 1506 kg/m3 (but it becomes denser as the storage time is prolonged, when it gets compressed or vibrated; in such situations its weight per volume can increase to as high as 104 lbs/cu-ft). This calculator is based on the fresh form Portland cement w/ the standard mass properties of 94 pounds to 1 cubic foot.
Convert Portland cement measuring units between stone (st) and Taiwanese piculs (dàn) but in the other reverse direction from Taiwanese piculs into stones.
|conversion result for Portland cement:|
|1 stone||st||= 0.11||Taiwanese piculs||dàn|
Converter type: Portland cement measurements
This online Portland cement from st into dàn converter is a handy tool not just for certified or experienced professionals.
First unit: stone (st) is used for measuring mass.
Second: Taiwanese picul (dàn) is unit of mass.
Portland cement per 0.11 dàn is equivalent to 1 what?
The Taiwanese piculs amount 0.11 dàn converts into 1 st, one stone. It is the EQUAL Portland cement mass value of 1 stone but in the Taiwanese piculs mass unit alternative.
How to convert 2 stones (st) of Portland cement into Taiwanese piculs (dàn)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.10583821966667 * 2 (or divide it by / 0.5)
1 st of Portland cement = ? dàn
1 st = 0.11 dàn of Portland cement
Other applications for Portland cement units calculator ...
With the above mentioned two-units calculating service it provides, this Portland cement converter proved to be useful also as an online tool for:
1. practicing stones and Taiwanese piculs of Portland cement ( st vs. dàn ) measuring values exchange.
2. Portland cement amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is Portland cement - values and properties.
International unit symbols for these two Portland cement measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for stone is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Taiwanese picul is:
One stone of Portland cement converted to Taiwanese picul equals to 0.11 dàn
How many Taiwanese piculs of Portland cement are in 1 stone? The answer is: The change of 1 st ( stone ) unit of Portland cement measure equals = to 0.11 dàn ( Taiwanese picul ) as the equivalent measure for the same Portland cement type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in st - stones for portland cement amount, the rule is that the stone number gets converted into dàn - Taiwanese piculs or any other Portland cement unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2