Portland cement conversion
Amount: 1 pennyweight (dwt) of mass
Equals: 0.28 fluid drams (fl dr) in volume
Converting pennyweight to fluid drams value in the Portland cement units scale.
TOGGLE : from fluid drams into pennyweights in the other way around.
CONVERT : between other Portland cement measuring units - complete list.
Conversion calculator for webmasters.
General Portland cement
General or common purpose Portland cement type (not any other weaker/cheaper cement replacement-version). It's the primary masonry binder hence bonding agent for mortars and concretes consisting of building sand, stones or other gravel aggregate, mixed with water.
By standard practice, when freshly poured, Portland cement has unit volume mass of 94 lbs/cu-ft - 1506 kg/m3 (but it becomes denser as the storage time is prolonged, when it gets compressed or vibrated; in such situations its weight per volume can increase to as high as 104 lbs/cu-ft). This calculator is based on the fresh form Portland cement w/ the standard mass properties of 94 pounds to 1 cubic foot.
Convert Portland cement measuring units between pennyweight (dwt) and fluid drams (fl dr) but in the other reverse direction from fluid drams into pennyweights.
|conversion result for Portland cement:|
|1 pennyweight||dwt||= 0.28||fluid drams||fl dr|
Converter type: Portland cement measurements
This online Portland cement from dwt into fl dr converter is a handy tool not just for certified or experienced professionals.
First unit: pennyweight (dwt) is used for measuring mass.
Second: fluid dram (fl dr) is unit of volume.
Portland cement per 0.28 fl dr is equivalent to 1 what?
The fluid drams amount 0.28 fl dr converts into 1 dwt, one pennyweight. It is the EQUAL Portland cement mass value of 1 pennyweight but in the fluid drams volume unit alternative.
How to convert 2 pennyweights (dwt) of Portland cement into fluid drams (fl dr)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
0.27939399202621 * 2 (or divide it by / 0.5)
1 dwt of Portland cement = ? fl dr
1 dwt = 0.28 fl dr of Portland cement
Other applications for Portland cement units calculator ...
With the above mentioned two-units calculating service it provides, this Portland cement converter proved to be useful also as an online tool for:
1. practicing pennyweights and fluid drams of Portland cement ( dwt vs. fl dr ) measuring values exchange.
2. Portland cement amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is Portland cement - values and properties.
International unit symbols for these two Portland cement measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for pennyweight is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for fluid dram is:
One pennyweight of Portland cement converted to fluid dram equals to 0.28 fl dr
How many fluid drams of Portland cement are in 1 pennyweight? The answer is: The change of 1 dwt ( pennyweight ) unit of Portland cement measure equals = to 0.28 fl dr ( fluid dram ) as the equivalent measure for the same Portland cement type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in dwt - pennyweights for portland cement amount, the rule is that the pennyweight number gets converted into fl dr - fluid drams or any other Portland cement unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2