Portland cement conversion
Amount: 1 cubic meter (m3) of volume
Equals: 968,210.45 pennyweights (dwt) in mass
Converting cubic meter to pennyweights value in the Portland cement units scale.
TOGGLE : from pennyweights into cubic meters in the other way around.
CONVERT : between other Portland cement measuring units - complete list.
Conversion calculator for webmasters.
General Portland cement
General or common purpose Portland cement type (not any other weaker/cheaper cement replacement-version). It's the primary masonry binder hence bonding agent for mortars and concretes consisting of building sand, stones or other gravel aggregate, mixed with water.
By standard practice, when freshly poured, Portland cement has unit volume mass of 94 lbs/cu-ft - 1506 kg/m3 (but it becomes denser as the storage time is prolonged, when it gets compressed or vibrated; in such situations its weight per volume can increase to as high as 104 lbs/cu-ft). This calculator is based on the fresh form Portland cement w/ the standard mass properties of 94 pounds to 1 cubic foot.
Convert Portland cement measuring units between cubic meter (m3) and pennyweights (dwt) but in the other reverse direction from pennyweights into cubic meters.
|conversion result for Portland cement:|
|1 cubic meter||m3||= 968,210.45||pennyweights||dwt|
Converter type: Portland cement measurements
This online Portland cement from m3 into dwt converter is a handy tool not just for certified or experienced professionals.
First unit: cubic meter (m3) is used for measuring volume.
Second: pennyweight (dwt) is unit of mass.
Portland cement per 968,210.45 dwt is equivalent to 1 what?
The pennyweights amount 968,210.45 dwt converts into 1 m3, one cubic meter. It is the EQUAL Portland cement volume value of 1 cubic meter but in the pennyweights mass unit alternative.
How to convert 2 cubic meters (m3) of Portland cement into pennyweights (dwt)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
968210.44594748 * 2 (or divide it by / 0.5)
1 m3 of Portland cement = ? dwt
1 m3 = 968,210.45 dwt of Portland cement
Other applications for Portland cement units calculator ...
With the above mentioned two-units calculating service it provides, this Portland cement converter proved to be useful also as an online tool for:
1. practicing cubic meters and pennyweights of Portland cement ( m3 vs. dwt ) measuring values exchange.
2. Portland cement amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is Portland cement - values and properties.
International unit symbols for these two Portland cement measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic meter is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for pennyweight is:
One cubic meter of Portland cement converted to pennyweight equals to 968,210.45 dwt
How many pennyweights of Portland cement are in 1 cubic meter? The answer is: The change of 1 m3 ( cubic meter ) unit of Portland cement measure equals = to 968,210.45 dwt ( pennyweight ) as the equivalent measure for the same Portland cement type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in m3 - cubic meters for portland cement amount, the rule is that the cubic meter number gets converted into dwt - pennyweights or any other Portland cement unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2