All content site-map> Building plans> Building details> Cooking> Firing ovens> Food nutrients> Flour measures> Oven photos>

angle units conversion

Amount: 1 full turn (turn) of angle
Equals: 376.99 diameter parts (Ø dia- part) in angle

Converting full turn to diameter parts value in the angle units scale.

TOGGLE :   from diameter parts into full turns in the other way around.

angle from full turn to diameter part conversion results

Enter a new full turn number to convert

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many digits after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other angle measuring units - complete list.

How many diameter parts are in 1 full turn? The answer is: 1 turn equals 376.99 Ø dia- part

376.99 Ø dia- part is converted to 1 of what?

The diameter parts unit number 376.99 Ø dia- part converts to 1 turn, one full turn. It is the EQUAL angle value of 1 full turn but in the diameter parts angle unit alternative.

turn/Ø dia- part angle conversion result
FromSymbolEqualsResultSymbol
1 turn = 376.99 Ø dia- part

Conversion chart - full turns to diameter parts

1 full turn to diameter parts = 376.99 Ø dia- part

2 full turns to diameter parts = 753.98 Ø dia- part

3 full turns to diameter parts = 1,130.97 Ø dia- part

4 full turns to diameter parts = 1,507.96 Ø dia- part

5 full turns to diameter parts = 1,884.96 Ø dia- part

6 full turns to diameter parts = 2,261.95 Ø dia- part

7 full turns to diameter parts = 2,638.94 Ø dia- part

8 full turns to diameter parts = 3,015.93 Ø dia- part

9 full turns to diameter parts = 3,392.92 Ø dia- part

10 full turns to diameter parts = 3,769.91 Ø dia- part

11 full turns to diameter parts = 4,146.90 Ø dia- part

12 full turns to diameter parts = 4,523.89 Ø dia- part

13 full turns to diameter parts = 4,900.88 Ø dia- part

14 full turns to diameter parts = 5,277.88 Ø dia- part

15 full turns to diameter parts = 5,654.87 Ø dia- part

Category: main menuangle menuFull turns

Convert angle of full turn (turn) and diameter parts (Ø dia- part) units in reverse from diameter parts into full turns.

Angles

This calculator is based on conversion of two angle units. An angle consists of two rays (as in sides of an angle sharing a common vertex or else called the endpoint.) Some belong to rotation measurements - spherical angles measured by arcs' lengths, pointing from the center, plus the radius. For a whole set of multiple units of angle on one page, try that Multiunit converter tool which has built in all angle unit-variations. Page with individual angle units.

Converter type: angle units

First unit: full turn (turn) is used for measuring angle.
Second: diameter part (Ø dia- part) is unit of angle.

QUESTION:
15 turn = ? Ø dia- part

ANSWER:
15 turn = 5,654.87 Ø dia- part

Abbreviation, or prefix, for full turn is:
turn
Abbreviation for diameter part is:
Ø dia- part

Other applications for this angle calculator ...

With the above mentioned two-units calculating service it provides, this angle converter proved to be useful also as a teaching tool:
1. in practicing full turns and diameter parts ( turn vs. Ø dia- part ) measures exchange.
2. for conversion factors between unit pairs.
3. work with angle's values and properties.

To link to this angle full turn to diameter parts online converter simply cut and paste the following.
The link to this tool will appear as: angle from full turn (turn) to diameter parts (Ø dia- part) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.