﻿ Convert 1/6 of turn to Ø dia- part | sextant to diameter parts

# angle conversion

## Amount: 1 sextant (1/6 of turn) of angle Equals: 62.83 diameter parts (Ø dia- part) in angle

Converting sextant to diameter parts value in the angle units scale.

TOGGLE :   from diameter parts into sextants in the other way around.

## angle from sextant to diameter part Conversion Results:

### Enter a New sextant Amount of angle to Convert From

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many numbers after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other angle measuring units - complete list.

Conversion calculator for webmasters.

## Angles

This calculator is based on conversion of two angle units. An angle consists of two rays (as in sides of an angle sharing a common vertex or else called the endpoint.) Some belong to rotation measurements - spherical angles measured by arcs' lengths, pointing from the center, plus the radius. For a whole set of multiple units of angle on one page, try that Multiunit converter tool which has built in all angle unit-variations. Page with individual angle units.

Convert angle measuring units between sextant (1/6 of turn) and diameter parts (Ø dia- part) but in the other reverse direction from diameter parts into sextants.

 conversion result for angle: From Symbol Equals Result To Symbol 1 sextant 1/6 of turn = 62.83 diameter parts Ø dia- part

# Converter type: angle units

This online angle from 1/6 of turn into Ø dia- part converter is a handy tool not just for certified or experienced professionals.

First unit: sextant (1/6 of turn) is used for measuring angle.
Second: diameter part (Ø dia- part) is unit of angle.

## 62.83 Ø dia- part is converted to 1 of what?

The diameter parts unit number 62.83 Ø dia- part converts to 1 1/6 of turn, one sextant. It is the EQUAL angle value of 1 sextant but in the diameter parts angle unit alternative.

How to convert 2 sextants (1/6 of turn) into diameter parts (Ø dia- part)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
62.8318530718 * 2 (or divide it by / 0.5)

QUESTION:
1 1/6 of turn = ? Ø dia- part

1 1/6 of turn = 62.83 Ø dia- part

## Other applications for this angle calculator ...

With the above mentioned two-units calculating service it provides, this angle converter proved to be useful also as a teaching tool:
1. in practicing sextants and diameter parts ( 1/6 of turn vs. Ø dia- part ) values exchange.
2. for conversion factors training exercises between unit pairs.
3. work with angle's values and properties.

International unit symbols for these two angle measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for sextant is:
1/6 of turn
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for diameter part is:
Ø dia- part

### One sextant of angle converted to diameter part equals to 62.83 Ø dia- part

How many diameter parts of angle are in 1 sextant? The answer is: The change of 1 1/6 of turn ( sextant ) unit of angle measure equals = to 62.83 Ø dia- part ( diameter part ) as the equivalent measure for the same angle type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in 1/6 of turn - sextants for angle amount, the rule is that the sextant number gets converted into Ø dia- part - diameter parts or any other angle unit absolutely exactly.

Conversion for how many diameter parts ( Ø dia- part ) of angle are contained in a sextant ( 1 1/6 of turn ). Or, how much in diameter parts of angle is in 1 sextant? To link to this angle sextant to diameter parts online converter simply cut and paste the following.
The link to this tool will appear as: angle from sextant (1/6 of turn) to diameter parts (Ø dia- part) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.