﻿ Convert MOA , ' to Ø dia- part | minute of arc to diameter parts

# angle conversion

## Amount: 1 minute of arc (MOA , ') of angle Equals: 0.017 diameter parts (Ø dia- part) in angle

Converting minute of arc to diameter parts value in the angle units scale.

TOGGLE :   from diameter parts into minutes of arc in the other way around.

## angle from minute of arc to diameter part Conversion Results:

### Enter a New minute of arc Amount of angle to Convert From

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many numbers after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other angle measuring units - complete list.

Conversion calculator for webmasters.

## Angles

This calculator is based on conversion of two angle units. An angle consists of two rays (as in sides of an angle sharing a common vertex or else called the endpoint.) Some belong to rotation measurements - spherical angles measured by arcs' lengths, pointing from the center, plus the radius. For a whole set of multiple units of angle on one page, try that Multiunit converter tool which has built in all angle unit-variations. Page with individual angle units.

Convert angle measuring units between minute of arc (MOA , ') and diameter parts (Ø dia- part) but in the other reverse direction from diameter parts into minutes of arc.

 conversion result for angle: From Symbol Equals Result To Symbol 1 minute of arc MOA , ' = 0.017 diameter parts Ø dia- part

# Converter type: angle units

This online angle from MOA , ' into Ø dia- part converter is a handy tool not just for certified or experienced professionals.

First unit: minute of arc (MOA , ') is used for measuring angle.
Second: diameter part (Ø dia- part) is unit of angle.

## 0.017 Ø dia- part is converted to 1 of what?

The diameter parts unit number 0.017 Ø dia- part converts to 1 MOA , ', one minute of arc. It is the EQUAL angle value of 1 minute of arc but in the diameter parts angle unit alternative.

How to convert 2 minutes of arc (MOA , ') into diameter parts (Ø dia- part)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.0174532925199 * 2 (or divide it by / 0.5)

QUESTION:
1 MOA , ' = ? Ø dia- part

1 MOA , ' = 0.017 Ø dia- part

## Other applications for this angle calculator ...

With the above mentioned two-units calculating service it provides, this angle converter proved to be useful also as a teaching tool:
1. in practicing minutes of arc and diameter parts ( MOA , ' vs. Ø dia- part ) values exchange.
2. for conversion factors training exercises between unit pairs.
3. work with angle's values and properties.

International unit symbols for these two angle measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for minute of arc is:
MOA , '
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for diameter part is:
Ø dia- part

### One minute of arc of angle converted to diameter part equals to 0.017 Ø dia- part

How many diameter parts of angle are in 1 minute of arc? The answer is: The change of 1 MOA , ' ( minute of arc ) unit of angle measure equals = to 0.017 Ø dia- part ( diameter part ) as the equivalent measure for the same angle type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in MOA , ' - minutes of arc for angle amount, the rule is that the minute of arc number gets converted into Ø dia- part - diameter parts or any other angle unit absolutely exactly.

Conversion for how many diameter parts ( Ø dia- part ) of angle are contained in a minute of arc ( 1 MOA , ' ). Or, how much in diameter parts of angle is in 1 minute of arc? To link to this angle minute of arc to diameter parts online converter simply cut and paste the following.
The link to this tool will appear as: angle from minute of arc (MOA , ') to diameter parts (Ø dia- part) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.