Converting cubic meter per hour to tonnes (water mass) per hour in flow rate unit scale...
flow rate conversion.
Amount: 1 cubic meter per hour (m3/h) of flow rate
Equals: 1.00 tonnes (water mass) per hour (ton/hr) in flow rate
TOGGLE : from tonnes (water mass) per hour into cubic meters per hour in the other way around.
CONVERT : between other flow rate measuring units - complete list.
Conversion calculator for webmasters.
Flow rate. Gas & Liquids.
This unit-to-unit calculator is based on conversion for one pair of two flow rate units. For a whole set of multiple units for volume and mass flow on one page, try the Multi-Unit converter tool which has built in all flowing rate unit-variations. Page with flow rate by mass unit pairs exchange.
Convert flow rate measuring units between cubic meter per hour (m3/h) and tonnes (water mass) per hour (ton/hr) but in the other reverse direction from tonnes (water mass) per hour into cubic meters per hour.
|conversion result for flow rate:|
|1 cubic meter per hour||m3/h||=||1.00||tonnes (water mass) per hour||ton/hr|
Converter type: flow rate units
This online flow rate from m3/h into ton/hr converter is a handy tool not just for certified or experienced professionals.
First unit: cubic meter per hour (m3/h) is used for measuring flow rate.
Second: tonne (water mass) per hour (ton/hr) is unit of flow rate.
1.00 ton/hr is converted to 1 of what?
The tonnes (water mass) per hour unit number 1.00 ton/hr converts to 1 m3/h, one cubic meter per hour. It is the EQUAL flow rate value of 1 cubic meter per hour but in the tonnes (water mass) per hour flow rate unit alternative.
How to convert 2 cubic meters per hour (m3/h) into tonnes (water mass) per hour (ton/hr)? Is there a calculation formula?
First divide the two units variables. Then multiply the result by 2 - for example:
1 * 2 (or divide it by / 0.5)
1 m3/h = ? ton/hr
1 m3/h = 1.00 ton/hr
Other applications for this flow rate calculator ...
With the above mentioned two-units calculating service it provides, this flow rate converter proved to be useful also as a teaching tool:
1. in practicing cubic meters per hour and tonnes (water mass) per hour ( m3/h vs. ton/hr ) values exchange.
2. for conversion factors training exercises between unit pairs.
3. work with flow rate's values and properties.
International unit symbols for these two flow rate measurements are:
Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic meter per hour is:
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for tonne (water mass) per hour is:
One cubic meter per hour of flow rate converted to tonne (water mass) per hour equals to 1.00 ton/hr
How many tonnes (water mass) per hour of flow rate are in 1 cubic meter per hour? The answer is: The change of 1 m3/h ( cubic meter per hour ) unit of flow rate measure equals = to 1.00 ton/hr ( tonne (water mass) per hour ) as the equivalent measure for the same flow rate type.
In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in m3/h - cubic meters per hour for flow rate amount, the rule is that the cubic meter per hour number gets converted into ton/hr - tonnes (water mass) per hour or any other flow rate unit absolutely exactly.
Oven info & galleries
- Home Page
- Oven building CDrom details
- Pizza ovens
- New gallery
- Oven meals
- Vintage forum
- Rectangle shape vs. round igloo
- Building details
- Refractory concrete
- Heat resistant mortar
- Concrete cladding layer
- Thermal insulation
- Saving money & time
- Good thermometer
- Oven building 1
- Building oven 2