Category: main menu • concrete menu • Cubic millimeters

concrete conversion

Amount: 1 cubic millimeter (mm3) of volume
Equals: 0.00012 solid ∅ 1 inch spheres (d, ∅ 1 in) in volume

Converting cubic millimeter to solid ∅ 1 inch spheres value in the concrete units scale.

TOGGLE :   from solid ∅ 1 inch spheres into cubic millimeters in the other way around.

concrete from cubic millimeter to sphere 1 inch in diameter Conversion Results:

Enter a New cubic millimeter Amount of concrete to Convert From * Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8) * Precision is how many numbers after decimal point (1 - 9)

Enter Amount : Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between cubic millimeter (mm3) and solid ∅ 1 inch spheres (d, ∅ 1 in) but in the other reverse direction from solid ∅ 1 inch spheres into cubic millimeters.

conversion result for concrete:
From	Symbol	Result	To	Symbol
1 cubic millimeter	mm3	= 0.00012	solid ∅ 1 inch spheres	d, ∅ 1 in

Converter type: concrete measurements

This online concrete from mm3 into d, ∅ 1 in converter is a handy tool not just for certified or experienced professionals.

First unit: cubic millimeter (mm3) is used for measuring volume.
Second: sphere 1 inch in diameter (d, ∅ 1 in) is unit of volume.

concrete per 0.00012 d, ∅ 1 in is equivalent to 1 what?

The solid ∅ 1 inch spheres amount 0.00012 d, ∅ 1 in converts into 1 mm3, one cubic millimeter. It is the EQUAL concrete volume value of 1 cubic millimeter but in the solid ∅ 1 inch spheres volume unit alternative.

How to convert 2 cubic millimeters (mm3) of concrete into solid ∅ 1 inch spheres (d, ∅ 1 in)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.00011654676622382 * 2 (or divide it by / 0.5)

QUESTION:
1 mm3 of concrete = ? d, ∅ 1 in

ANSWER:
1 mm3 = 0.00012 d, ∅ 1 in of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing cubic millimeters and solid ∅ 1 inch spheres of concrete ( mm3 vs. d, ∅ 1 in ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for cubic millimeter is:
mm3
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for sphere 1 inch in diameter is:
d, ∅ 1 in

One cubic millimeter of concrete converted to sphere 1 inch in diameter equals to 0.00012 d, ∅ 1 in

How many solid ∅ 1 inch spheres of concrete are in 1 cubic millimeter? The answer is: The change of 1 mm3 ( cubic millimeter ) unit of concrete measure equals = to 0.00012 d, ∅ 1 in ( sphere 1 inch in diameter ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in mm3 - cubic millimeters for concrete amount, the rule is that the cubic millimeter number gets converted into d, ∅ 1 in - solid ∅ 1 inch spheres or any other concrete unit absolutely exactly.

• 
  Jamie and Katrina's brick oven with temperature gauge, in Victoria.
• 
  Baking sourdough breads in quantity in Canada
• 
  Wood oven and meats cold smoker by Reinhard in Clearwater, Florida