All content site-map & Search> Building plans> Building details> Cooking> Firing ovens> Food nutrients> Flour measures> Oven photos>

Category: main menuconcrete menuSolid ∅ 1 inch spheres

concrete conversion

Amount: 1 sphere 1 inch in diameter (d, ∅ 1 in) of volume
Equals: 0.077 Japanese kanme (貫, 貫目) in mass

Converting sphere 1 inch in diameter to Japanese kanme value in the concrete units scale.

TOGGLE :   from Japanese kanme into solid ∅ 1 inch spheres in the other way around.

concrete from sphere 1 inch in diameter to Japanese kanme Conversion Results:

Enter a New sphere 1 inch in diameter Amount of concrete to Convert From

* Whole numbers, decimals or fractions (ie: 6, 5.33, 17 3/8)
* Precision is how many numbers after decimal point (1 - 9)

Enter Amount :
Decimal Precision :

CONVERT :   between other concrete measuring units - complete list.

Conversion calculator for webmasters.

Concrete

This general purpose concrete formulation, called also concrete-aggregate (4:1 - sand/gravel aggregate : cement - mixing ratio w/ water) conversion tool is based on the concrete mass density of 2400 kg/m3 - 150 lbs/ft3 after curing (rounded). Unit mass per cubic centimeter, concrete has density 2.41g/cm3. The main concrete calculator page.

The 4:1 strength concrete mixing formula applies the measuring portions in volume sense (e.g. 4 buckets of concrete aggregate, which consists of gravel and sand, with 1 bucket of cement.) In order not to end up with a too wet concrete, add water gradually as the mixing progresses. If mixing concrete manually by hand; mix dry matter portions first and only then add water. This concrete type is commonly reinforced with metal rebars or mesh.

Convert concrete measuring units between sphere 1 inch in diameter (d, ∅ 1 in) and Japanese kanme (貫, 貫目) but in the other reverse direction from Japanese kanme into solid ∅ 1 inch spheres.

conversion result for concrete:
FromSymbolResultToSymbol
1 sphere 1 inch in diameter d, ∅ 1 in = 0.077 Japanese kanme 貫, 貫目

Converter type: concrete measurements

This online concrete from d, ∅ 1 in into 貫, 貫目 converter is a handy tool not just for certified or experienced professionals.

First unit: sphere 1 inch in diameter (d, ∅ 1 in) is used for measuring volume.
Second: Japanese kanme (貫, 貫目) is unit of mass.

concrete per 0.077 貫, 貫目 is equivalent to 1 what?

The Japanese kanme amount 0.077 貫, 貫目 converts into 1 d, ∅ 1 in, one sphere 1 inch in diameter. It is the EQUAL concrete volume value of 1 sphere 1 inch in diameter but in the Japanese kanme mass unit alternative.

How to convert 2 solid ∅ 1 inch spheres (d, ∅ 1 in) of concrete into Japanese kanme (貫, 貫目)? Is there a calculation formula?

First divide the two units variables. Then multiply the result by 2 - for example:
0.0774323370545 * 2 (or divide it by / 0.5)

QUESTION:
1 d, ∅ 1 in of concrete = ? 貫, 貫目

ANSWER:
1 d, ∅ 1 in = 0.077 貫, 貫目 of concrete

Other applications for concrete units calculator ...

With the above mentioned two-units calculating service it provides, this concrete converter proved to be useful also as an online tool for:
1. practicing solid ∅ 1 inch spheres and Japanese kanme of concrete ( d, ∅ 1 in vs. 貫, 貫目 ) measuring values exchange.
2. concrete amounts conversion factors - between numerous unit pairs.
3. working with - how heavy is concrete - values and properties.

International unit symbols for these two concrete measurements are:

Abbreviation or prefix ( abbr. short brevis ), unit symbol, for sphere 1 inch in diameter is:
d, ∅ 1 in
Abbreviation or prefix ( abbr. ) brevis - short unit symbol for Japanese kanme is:
貫, 貫目

One sphere 1 inch in diameter of concrete converted to Japanese kanme equals to 0.077 貫, 貫目

How many Japanese kanme of concrete are in 1 sphere 1 inch in diameter? The answer is: The change of 1 d, ∅ 1 in ( sphere 1 inch in diameter ) unit of concrete measure equals = to 0.077 貫, 貫目 ( Japanese kanme ) as the equivalent measure for the same concrete type.

In principle with any measuring task, switched on professional people always ensure, and their success depends on, they get the most precise conversion results everywhere and every-time. Not only whenever possible, it's always so. Often having only a good idea ( or more ideas ) might not be perfect nor good enough solution. If there is an exact known measure in d, ∅ 1 in - solid ∅ 1 inch spheres for concrete amount, the rule is that the sphere 1 inch in diameter number gets converted into 貫, 貫目 - Japanese kanme or any other concrete unit absolutely exactly.

Conversion for how many Japanese kanme ( 貫, 貫目 ) of concrete are contained in a sphere 1 inch in diameter ( 1 d, ∅ 1 in ). Or, how much in Japanese kanme of concrete is in 1 sphere 1 inch in diameter? To link to this concrete sphere 1 inch in diameter to Japanese kanme online converter simply cut and paste the following.
The link to this tool will appear as: concrete from sphere 1 inch in diameter (d, ∅ 1 in) to Japanese kanme (貫, 貫目) conversion.

I've done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.